Multi Function Tester

Catalogue

KEW 6516BT - Multi Function Tester

  • Color LCD 3.5 inches dot matrix.
  • Anti-Trip Technology (with 2 & 3 wire) for no trip LOOP L-PE testing on all RCDs.
  • With 2 wire only, very useful in case of no Neutral (i.e. 3-phase motor lines).
  • High test current range of 2? with 0.001? resolution.
  • Zs Limit compares the values required by Electrical Installations Standard with measured results.
  • Type AC, A, F, B(General & Selective), EV and Variable RCDs.
  • Single and Auto test, Ramp test and Contact voltage.
  • Earth resistance test 2 and 3 wires with all accessories included.
  • Resistance test 100, 250, 500 & 1000V with auto discharge voltage.
  • Continuity test at 200mA or 15mA with selectable buzzer for fast judgment.
  • On 3-phase lines with clear indication of the sequence on the display.
  • TRMS Voltage measurements 2-600V, Mains Frequency.
  • Display shows how to connect the instrument according to the function selected.
  • Surge Protection Device test, for SPD that uses varistor.
  • Portable Appliance Tester function, for Insulation and Protective conductor resistance test Communication by "KEW CONNECT".
  • IEC 61010-1 CAT IV 300 V, CAT III 600 V. IEC 61557-1,2,3,4,5,6,7,10.

Measuring range

0.00-20.00?

Open circuit voltage

5V±0.4V DC

Measuring current

200mA DC(nominal value)

Accuracy

±3%rdg±5dgt

Display range

30V-270V

Accuracy

±5V

Protective conductor resistance test

Measuring range

0.00-20.00?

Open circuit voltage

5V±0.4V DC

Measuring current

200mA DC(nominal value)

Accuracy

±3%rdg±5dgt

Insulation resistance test

Rated volatge

250V, 500V

Measuring range

0.00-20.00M?

No-load voltage

250V DC +20%,-0%, 500V DC +20%,-0%

Short circuit current

1.5mA DC or less

Accuracy

±2%rdg±3dgt

Load current/Leakage current test

Item

Load current, Leakage current

Mains voltage range

100-253V/50Hz

Measuring range

0.10-10.00A rms, 0.10-20.00mA rms

Accuracy

±10%rdg±5dgt, ±3%rdg±5dgt

RCD test

Rated voltage

230V -15% - +10%/50Hz

Rated current

10mA/30mA

Function

× 1, × 5

Test duration

0.0ms-500.0ms, 0.0ms-40.0ms

Operating time accuracy

±2ms(?40ms),±8ms(>40ms)

General

Power source

LR6(AA)(1.5V) × 6

Applicable Standards

IEC/EN61010-1 CAT II 300V, IEC/EN61010-2-030, IEC/EN61010-031, EN61326-2-2, AS/NZ3760

Dimensions / Weight

261(L) × 104(W) × 57(D)mm / Approx. 930g(including batteries)

Included Accessories

7277(Mains lead), 7129A(Test lead with Alligator clip), 7161A(Flat test prod), 7276(Adaptor for Extension cord), 9193(Carrying case), 8928(Fuse[10A/250V]), 9121(Shoulder strap), Buckle, LR6(AA) x 6, Instruction manual

Optional Accessories

8263-USB(USB cable with "KEW Report(software)"), 7275(Printer cable:Mini Din 6pin-D-sub 9pin), 7248(Test lead with Alligator clip and Flat test probe)
No datas found
related products
;