PW8001 - Power Analyzer Upto 8 Chanels(Customizable)

Catalogue
description

  • The PW8001 sets a new benchmark for complete power analysis solutions with Hioki being the only manufacturer that offers industry-leading power analyzers and a wide portfolio of high-accuracy current sensors both developed and manufactured by Hioki. This enables to align their performance and results in more accurate and stable measurements from DC to high frequencies and low power factor measurements thanks to functions like the automatic phase shift correction.

Key Features

  • World-class measurement accuracy: Basic accuracy ±0.03%, DC accuracy ±0.05%, 50 kHz accuracy 0.2% (*1)
  • Accurate capture of power fluctuations caused by high-speed switching: Sampling performance 18-bit, 15 MHz, Noise Resistance (CMRR) 110 dB, 100 kHz (*1)
  • Up to 8 power channels optimizing your measurement: 8-channel power measurement
  • Accurately measure high-frequency, low-power-factor power: Current sensor automatic phase correction function (*2)
  • Simultaneous analysis of 4 motors: 4-motor/2-motor simultaneous analysis function
  • Integration of measurement data into CAN networks: CAN or CAN FD output function
  • Intuitive and Quantitative Insights with Power Spectrum Analysis (PSA) function
  • Safe evaluation of increasingly high-voltage solar inverters: 1500 V DC CAT II / 1000 V DC CAT III (*3)
  • Earning Japan Calibration Service System (JCSS) Certification for DC Power Measurement. (*4)

Measurement lines

 1-phase-2-wire, 1-phase-3-wire, 3-phase-3-wire, 3-phase-4-wire

No. of PW8001 input units

 Max. 8 units (mix and match)

Type of input unit

 U7001 2.5 MS/s INPUT UNIT U7005 15 MS/s INPUT UNIT

Measurement frequency band

 U7001: DC, 0.1 Hz to 1 MHz U7005: DC, 0.1 Hz to 5 MHz

Sampling

 U7001: 2.5 MHz, 16-bit U7005: 15 MHz, 18-bit

Data update rate

 1 ms, 10 ms, 50 ms, 200 ms

Accuracy for power (U7001)

 50/60 Hz: 0.02% of reading + 0.05% of range DC: 0.02% of reading + 0.05% of range 50 kHz : 0.4% of reading + 0.1% of range

Accuracy for power (U7005)

 50/60 Hz : 0.01% of reading + 0.02% of range DC : 0.02% + 0.03% of reading of range 50 kHz: 0.15% of reading + 0.05% of range

Measurement range

 Voltage: 6 V, 15 V, 30 V, 60 V, 150 V, 300 V, 600 V, 1500 V Current: (Probe1) 40 mA to 2 kA, (Probe2) 100 mA to 50 kA (Probe1 : Hioki's high-accuracy current sensor interface supports automatic identification and phase shift correction. Probe 2: BNC I/F only for U7001)

Measurement parameters

 voltage (U), current (I), active power (P), apparent power (S), reactive power(Q), power factor (λ), phase angle (φ), voltage frequency（fU）, current frequency（fI）, efficiency (η), loss (Loss), voltage ripple factor (Urf), current ripple factor (Irf), current integration (Ih), power integration (WP)

IEC measurement mode

 When the measurement line has a frequency of 50 Hz or 60 Hz, the instrument can perform harmonic measurements according to IEC61000-4-7 and voltage fluctuation/flicker measurements according to IEC61000-4-15

IEC-compliant harmonic measurement

 Compliant with IEC 61000-4-7:2002 Analysis order: Harmonics: 0th to 200th orders, Inter-harmonic: 0.5th to 200.5th orders

IEC-compliant flicker measurement

 Compliant with IEC 61000-4-15:2010 Ed 2.0 Flickermeter Class F2 Measurement items: Short-term flicker (Pst), Maximum short-term flicker value (PstMax), Long-term flicker value (Plt), Maximum instantaneous flicker value (PinstMax), Minimum instantaneous flicker value (PinstMin), Relative steady-sta

Calculation function

 Efficiency and loss calculations, User-defined calculations, Delta conversion, Current sensor automatic phase shift calculation

Synchronization measurement

 Optical link: Up to two units, 16 channels maximum BNC Synchronization: Up to four units, 32 channels maximum

External interface

 USB flash drive, LAN, GP-IB, RS-232C, external control, optical link, BNC sync., CAN or CAN FD

Power supply

 100 V to 240 V AC, 50/60 Hz, 230 VA

Dimensions and mass

 Approx. 430 mm (16.93 in) W × 221 mm (8.70 in) H × 361mm (14.21 in) D, Approx. 14kg (493.84 oz)

Included accessories

 - Power cord ×1 - Instruction Manual ×1 - GENNECT One (PC applications) CD ×1 - D-sub 25-pin connector ×1 (PW8001-02, -05, -12, -15 only)
No datas found
related products
Power Analyzer PW3390
PW6001 - 6 Channel Power Analyzer
;